آلة الطباعة فليكسو الخطية LS-HS2 (20 ~ 130 م / دقيقة)
الاقسام : ماكينات الطباعة الفلكسوغرافية
هذه آلة طباعة مضمّنة من النوع عالي السرعة متوافقة مع الطارد ، يمكن أن تصل سرعة الطباعة القصوى إلى 120 مترًا / دقيقة ، لتكبير قدرات التجفيف واستخدام نظام تروس الدوران الأمامي والخلفي 360 ، قادر على ضبط موضع اللون الأمامي والخلفي أثناء عمل الآلة في الطباعة. محطتان للطباعة بنفس الطريقة ، راحة العميل للتحقق من جودة الطباعة والتشغيل ، يمكن للآلة طباعة مجموعة ألوان واحدة من جانب واحد ، مع بكرة الرقص للتحكم في دخول الأفلام إلى محطة الطباعة بشكل متساوٍ وسلس للغاية مع غرفة التجفيف تأكد من إمكانية تجفيف النموذج واللون المطبوع وفقًا للسرعة العالية ، والطباعة المستمرة توفر الوقت والعملية للتشغيل.
لس في خط فليكس آلة الطباعة لس-1
الاقسام : ماكينات الطباعة الفلكسوغرافية
التعاون مع الطارد لجعل الطباعة في خط مستمر، في وضع مع الأسطوانة الرقص للسيطرة على الأفلام يذهب إلى محطة الطباعة جدا حتى وسلس، آلة مجهزة غرفة التجفيف ضمان نمط الطباعة واللون يمكن تجفيفها وفقا مع السرعة، في خط الطباعة يمكن حفظ الأوقات وعملية لعملية. مجموعة المحرك الرئيسي على جانب الإطار آلة سهلة للتشغيل والصيانة.
آلة التصفيح بالبثق
الاقسام : آلات الطلاء والتصفيح بالبثق
محطة PLC 1 - التحكم في سرعة الترقق - ضبط سرعة البثق - ضبط معلمة الترقق - ضبط درجة حرارة التشغيل - مراقبة حالة السائق - توفير المواد المضافة للإنتاج - معلومات تحذير الأعطال - مراقبة معلومات التوتر PLC STATION 2 - التحكم التلقائي في شد الفك - التحكم في اكتشاف القطر - بكرة راقصة التحكم في التوتر - تغيير أسطوانة القطع الأوتوماتيكي - فحص سطح الالتصاق بالربط - التوصيل التلقائي قبل المحرك - التحكم التلقائي في شد التغذية - التحكم في محول الطاقة E / P PLC STATION 3 - التحكم التلقائي في شد الترجيع - التحكم في شد شريط الترجيع - التحكم في شد بكرة الراقص - القطع التلقائي تغيير البكرة - تغيير البكرة بدون توقف - العد التلقائي للطول - التحكم التلقائي في شد التغذية - التحكم في محول الطاقة E / P
HDPE/LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMT-MINI
الاقسام : آلات بثق أفلام النفخ
The KMT-MINI is a high-speed plastic inflation machine for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing PE film up to 550 mm wide for applications such as car film and garment bags. The extruder unit is fitted with an Ø40mm screw at a 26:1 L/D ratio and a 15 HP AC driving motor with inverter, supported by 3-zone auto thermo control. Film thickness ranges from 0.008-0.10 mm (H) to 0.015-0.15 mm (L), with output between 15-38 kgs/hr (H) and 15-45 kgs/hr (L), and the take-up unit runs at speeds up to 75 m/min. Model: KMT-MINI Suitable material: HDPE/LDPE/LLDPE Film thickness: H 0.008-0.10 mm / L 0.015-0.15 mm Film width range: H 550 mm / L 550 mm Film output: H 15-38 kgs/hr / L 15-45 kgs/hr Screw diameter/type: Ø40mm, L/D ratio 26:1 Driving motor: AC 15 HP + Inverter Take-up speed: 75 m/min Machine dimension: 380×300×310 cm
HDPE/LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMT-65
الاقسام : آلات بثق أفلام النفخ
The KMT-65 is a high-speed plastic inflation machine for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing PE film up to 1,400 mm wide for applications such as car film and plastic garment bags. The extruder unit is fitted with an Ø65mm screw at a 26:1 L/D ratio and a 50 HP AC driving motor with inverter, supported by 4-zone auto thermo control. Film output ranges from 30-90 kgs/hr (H) to 50-105 kgs/hr (L), and the take-up unit runs a 1500 mm roller at speeds up to 50 m/min across the 1400 mm effective width. Model: KMT-65 Suitable material: HDPE/LDPE/LLDPE Film thickness: H 0.015-0.10 mm / L 0.025-0.15 mm Film width range: 1400 mm Film output: H 30-90 kgs/hr / L 50-105 kgs/hr Screw diameter/type: Ø65mm, L/D ratio 26:1 Driving motor: AC 50 HP + Inverter Take-up speed: 50 m/min Machine dimension: 600×400×600 cm
ارتفاع ضغط السائل حاقن-بسكس
الاقسام : قطع غيار خاصة بالماكينة
تم تصميم سلسلة بسكس عالية الضغط المغذي السائل من قبل سبائك الصين للضغط العالي تغذية السائل من البلاستيك أو المطاط في التطبيقات الغذائية أو الصيدلانية.
High Output Single Screw Pelletizing Extruder | CK-DHS
الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات
CK-DHS series Single Screw Extruder has the fastest screw rotational speed and highest throughput among all single screw series. It equipped with high-efficiency gearbox which is capable of bearing greater back pressure and torque force during production. The low-noise and durable gearbox is adjustable to satisfy different production conditions. Possible materials : ABS, HIPS, PP, PE, PC&ABS, PC. PMMA.
براغي الخلط
الاقسام : البراغي والأسطوانات
+ للراتنجات مثل بودرة التلك ذات اللزوجة العالية وصعوبة الخلط. + لتحسين تأثير الخلط الذي يمكن أن يعمل أيضًا مع البراغي لجميع أنواع الراتنجات. + يتم تصنيعها من SKD61 من خلال معالجة خاصة للتقسية بإنتاجية عالية وخلط عالي والتي يمكن أن تعمل أيضًا مع براغي لجميع أنواع الراتنجات.
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35
الاقسام : آلات بثق أفلام النفخ
The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-MINI
الاقسام : آلات بثق أفلام النفخ
The KMH-MINI is a compact HDPE blown film extrusion line built for smaller-format inflation film production. Within PRM-Taiwan's plastic inflation machinery category, HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-MINI produces HDPE film in 0.008-0.10 mm thickness and up to 550 mm width, with output between 15-32 kgs/hr.The extruder uses a Ø 40mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø60/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-MINISuitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 550 mmFilm output: 15-32 kgs/hrScrew diameter: Ø 40mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 370×270×340 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-65
الاقسام : آلات بثق أفلام النفخ
The KMH-65 is a high-speed HDPE blown film extrusion line built for wide-format film production, used in applications such as plastic shopping bags. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film through a die and air ring, then flattened and wound. The KMH-65 produces HDPE film in 0.008-0.10 mm thickness and up to 1300 mm width, with output between 20-80 kgs/hr.The extruder runs a Ø 65 mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø100/150 mm die paired with a Ø150/200 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KMH-65Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 1300 mmFilm output: 20-80 kgs/hrScrew diameter: Ø 65 mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 600×400×600 cm
آلة التضخم عالية السرعة HDPE (GF-H45)
الاقسام : آلات بثق أفلام النفخ
آلة نفخ عالية السرعة HDPE (GF-H45)