برم تايوان

بحث - high speed

We have found 287 product types of high speed and 39 related suppliers. Get the most detailed machinery information and contact the manufacturers directly.
Highlighted Suppliers
منتجات
آلة تحبيب المخروط المزدوجة عالية السرعة - القطع تحت الماء
آلة تحبيب المخروط المزدوجة عالية السرعة - القطع تحت الماء

الاقسام : خطوط التحبيب والخلط المركب

مناسب للمواد الخام عالية اللزوجة ، مثل PP ، PMMA ، TPU ، PU ، PLA ، PET ، TPU ، PU ، PLA وغيرها. مادة خام عالية اللزوجة. سعة عالية ، استهلاك منخفض للكهرباء ، سهل التنظيف وتغيير المواد ، يعجن جيدًا ، قطع تحت الماء

آلة قطع الورق
آلة قطع الورق

الاقسام : آلات القطع

● تحمل القطع: + -0.5 ملم ● سرعة الماكينة: 200 م / دقيقة

آلة صنع حقيبة تي شيرت اقتصادية عالية السرعة (نظام قطع ساخن) PV
آلة صنع حقيبة تي شيرت اقتصادية عالية السرعة (نظام قطع ساخن) PV

الاقسام : آلات صناعة الأكياس حسب الاستخدام

نظام قص سريع عالي السرعة - لأكياس القمصان المطبوعة. تقوم الخلية الكهروضوئية والمضاعفات بتسجيل موضع الطباعة الدقيق. يتوفر نظام القطع الساخن عالي السرعة في أنظمة 200/250/300 دورة في الدقيقة. مجموعة يدوية - نظام اقتصادي بدون القابض واللكمة الهوائية. يقوم المخاض بجمع الأكوام المحظورة واللكم يدويًا عن طريق لكمة هوائية خارج الخط.

E waste recycling system
E waste recycling system

الاقسام : خطوط الغسيل والفرز

The plastic wash line system is designed for mixed rigid plastics washing and separation. Minimizing the recycling water flow rate and evaporation losses. The shredding system is with wear resistant design to maximize the consistent running of the system and minimize operational costs. High speed washing system with corresponding speed according to the material type liberates contamination from the plastic. The underwater force-washing paddle of the washing tank maximize the washing efficiency. Mechanical and thermal drying system minimize the moisture content of the end product. Shredding, high speed washing and drying is optimized to avoid over processing, which causes material loss (fines creation). Mechanical (centrifugal and squeezing) and thermal drying systems control the moisture content of the finished product. System automation makes sure the components actions are linked, the system capacity is maximized, and that the system is suitably protected against interfering material. Customized 316 stainless steel system is optional for corrosive material washing. NIR, Color, X-ray or Electrostatic sorters can be provided according to the material type and separation requirements.

آلة قناع طبي من نوع حلقة الأذن عالية السرعة 1 + 1
آلة قناع طبي من نوع حلقة الأذن عالية السرعة 1 + 1

الاقسام : آلات صناعة الأكياس حسب الاستخدام

The MGA-MSK-400-S8 is a high-speed 1+1 ear-loop face-out type medical mask machine that converts non-woven and melt-blown fabric rolls into finished masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It draws material from four unwinding stations feeding non-woven and melt-blown materials, with a nose bridge flattening device supporting mask quality.The ultrasonic welding device is Taiwan-made, and servo-controlled ear-loop cutting keeps pace with production speed. Eight servo motor sets drive the machine, and an automatic conveyor moves counted, stacked masks smoothly to packaging.Model: MGA-MSK-400-S8Mask size: 175 x 95 mm or 145 x 95 mm (machine produces one size only)Output: 65 - 95 pcs/minMachine dimension: 4,500 (L) x 2,430 (W) x 1,988 (H) mmNet weight: 800 kgPower consumption: 9 kwPower input: 220V, single phaseServo motors: 8 sets

آلة صنع قناع نوع الأسماك عالية السرعة KF94
آلة صنع قناع نوع الأسماك عالية السرعة KF94

الاقسام : آلات صناعة الأكياس حسب الاستخدام

The MGA-MSK-KF94 is a high-speed KF94 fish type mask making machine that converts non-woven fabric rolls into finished KF94-shaped masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It is equipped with two sets of 15kHz 2600W ultrasonic systems and two sets of 20kHz ultrasonics for efficient mask welding, plus a rotating cutting roll designed specifically for the fish mask shape.The ear loop welding station uses 11 servo motors for precise control, and a high-level PLC with virtual angle control synchronizes each motor's working angle for accurate ear loop welding placement.Model: MGA-MSK-KF94Mask design: KF94 Fish Type MaskOutput: 60 - 95 pcs/minMachine dimension: 6,735 (L) x 3,231 (W) x 2,000 (H) mmMachine weight: 2,500 kgRequired power: 6 kwUltrasonic welding: 2 x 15kHz 2600W + 2 x 20kHz systemsEar loop welding: 11 servo motors, PLC virtual angle control

صانع الأكياس ذو المقبض الحلقي عالي السرعة مع السدادات المستمرة LY-800HLC
صانع الأكياس ذو المقبض الحلقي عالي السرعة مع السدادات المستمرة LY-800HLC

الاقسام : ماكينات تصنيع الأكياس البلاستيكية

LY-800HLC هي آلة تصنيع الأكياس ذات الحلقة الناعمة فائقة السرعة والمتخصصة. إنها مجهزة بـ 5 مجموعات من المحركات المؤازرة لإظهار أدائها المتميز. يوفر السداد المستمر الفريد كفاءة عالية ونوعية جيدة من الختم العلوي. تعد الواجهة بين الإنسان والآلة جزءًا قياسيًا للتشغيل السهل والودي.

LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-65
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-65

الاقسام : آلات بثق أفلام النفخ

The KML-65 is an LDPE/LLDPE blown film extrusion line for wide-format film production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-65 processes film in 0.025-0.15 mm thickness and 400-1400 mm width, with output between 50-105 kgs/hr. The extruder runs a Ø 65mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø350 mm die with a Ø400 mm air ring, and the take-up section reaches speeds up to 45 m/min. Model: KML-65 Suitable material: LDPE/LLDPE Film thickness: 0.025-0.15 mm Film width range: 400-1400 mm Film output: 50-105 kgs/hr Screw diameter: Ø 65mm, L/D ratio 26:1 Driving motor: AC 50 HP + Inverter Machine dimension: 800×400×630 cm

LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-25
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-25

الاقسام : آلات بثق أفلام النفخ

The KML-25 is a compact LDPE/LLDPE blown film extrusion line for narrow-width film production, including applications such as car film. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring, then wound. The KML-25 produces film in 0.015-0.10 mm thickness and up to 150 mm width, with output between 5-15 kgs/hr. The extruder runs a Ø 25 mm screw at a 26:1 L/D ratio with 2-zone auto thermo control on the barrel, driven by an AC 3 HP motor with inverter. The die unit uses a Ø40 mm die with a Ø100 mm air ring, and the take-up section operates at speeds up to 45 m/min. Model: KML-25 Suitable material: LDPE/LLDPE Film thickness: 0.015-0.10 mm Film width range: 150 mm Film output: 5-15 kgs/hr Screw diameter: Ø 25 mm, L/D ratio 26:1 Driving motor: AC 3 HP + Inverter Machine dimension: 150×70×250 cm

LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-45/55
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-45/55

الاقسام : آلات بثق أفلام النفخ

The KML-45/55 is an LDPE/LLDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film before take-up and winding. The KML-45 produces film up to 650 mm width and the KML-55 between 400-1000 mm width, both in 0.02-0.15 mm thickness. The KML-45 runs a Ø 45mm screw and the KML-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KML-45 and AC 30 HP for the KML-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling. Models: KML-45 / KML-55 Suitable material: LDPE/LLDPE Film thickness: 0.02-0.15 mm (both models) Film width range: 650 mm (KML-45) / 400-1000 mm (KML-55) Film output: 20-55 kgs/hr (KML-45) / 30-72 kgs/hr (KML-55) Screw diameter: Ø 45mm (KML-45) / Ø 55mm (KML-55), L/D ratio 26:1 Driving motor: AC 20 HP + Inverter (KML-45) / AC 30 HP + Inverter (KML-55) Machine dimension: 470×165×400 cm (KML-45) / 500×220×450 cm (KML-55)

LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-120
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-120

الاقسام : آلات بثق أفلام النفخ

The KML-120 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film in a width range of 1800-3000 mm for applications such as plastic farm film. The extruder unit is fitted with an Ø120mm screw at a 30:1 L/D ratio and a 150 HP AC driving motor with inverter, supported by 8-zone auto thermo control. The die unit uses an Ø750mm die and Ø800mm air ring, and the take-up unit runs at speeds up to 22 m/min across the 3000 mm effective width. Model: KML-120 Suitable material: LDPE/LLDPE Film thickness: 0.05-0.15 mm Film width range: 1800-3000 mm Film output: 280 kgs/hr Screw diameter/type: Ø120mm, L/D ratio 30:1 Driving motor: AC 150 HP + Inverter Take-up speed: 22 m/min Machine dimension: 16.5×7×10 m