English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Ultrasonic Metal Welding Machine KWG2620-EW
الاقسام : أجهزة اللحام ومعالجة الأسطح
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG2620-E
الاقسام : أجهزة اللحام ومعالجة الأسطح
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG0930-E
الاقسام : أجهزة اللحام ومعالجة الأسطح
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
ULTRASONIC CLEANING MACHINE BOX TYPE ULTRASONIC CLEANING MACHINE
الاقسام : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
ULTRASONIC CLEANING MACHINE SINGLE TANK ULTRASONIC CLEANING MACHINE
الاقسام : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
أختام U-Cups
الاقسام : Rubber Products & Parts
أختام U-Cups (أو حلقات U) هي أختام شفة متعددة الاستخدامات، سميت نسبةً إلى مقطعها العرضي المميز على شكل "U". تم تصميمها خصيصًا للتطبيقات الترددية، وتعمل كأختام أساسية في الأسطوانات الهيدروليكية والهوائية. الفوائد الرئيسية للأداء الختم المنشط بالضغط: يسمح الشكل على شكل U لشفتَي الختم بالتمدد ضد سطح المعدن تحت ضغط النظام. مع زيادة الضغط، تزداد قوة الختم بشكل متناسب لضمان مانع تسرب موثوق. تصميم ذو غرض مزدوج: تعمل أختام U-Cups كـ ختم ساق (لمنع التسرب الخارجي) و ختم مكبس (لمنع التسرب الداخلي بين غرف الأسطوانة). تقليل الاحتكاك: تضمن هندسة الشفة ختمًا آمنًا مع أقل مساحة تماس، مما يقلل من توليد الحرارة والتآكل الميكانيكي أثناء التشغيل. التكامل مع حلقات الدعم السلامة عند الضغط العالي: للأنظمة التي تعمل فوق 5 ميجا باسكال (50 بار)، من الضروري استخدام U-Cup مع حلقة دعم لمنع اندفاع المادة إلى الفجوات. الدعم الهيكلي: تساعد حلقة الدعم على تثبيت U-Cup في التطبيقات الديناميكية، خاصة عند وجود فجوات كبيرة أو دورات عالية السرعة. المواد الصناعية الشائعة البولي يوريثان (PU): معروف بمقاومته العالية للتآكل وقوته القصوى، مثالي للأنظمة الهيدروليكية الثقيلة. النيتريل (NBR): الخيار القياسي للأسطوانات الهوائية والبيئات منخفضة الضغط. PTFE / POM: غالبًا ما يستخدم لحلقات الدعم لتوفير دعم عالي الصلابة.
آلة التشكيل بالحقن المكونة من مكونات كهربائية بالكامل (سلسلة CT-R)
الاقسام : ماكينات الحقن الكهربائية
إنها معدات قولبة بالحقن مكونة من عنصرين كهربائيين بالكامل. إنها مناسبة للمنتجات المكونة من عنصرين ومتعددة المكونات ، بما في ذلك الأجزاء الإلكترونية ، والأجهزة الطبية ، وحاويات مستحضرات التجميل ، إلخ.
آلة التشكيل بالحقن المكونة من مكونين من طاولة دوارة أفقية كبيرة (سلسلة HB-R)
الاقسام : ماكينات الحقن الأفقية
إنها معدات صب حقن كبيرة ، وهي مناسبة للأجهزة والألواح المنزلية واسعة النطاق ، المناور للسيارات ، الأضواء ، النوافذ الزاوية وغيرها من الإنتاج المكون من مكونين.
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-65
الاقسام : آلات بثق أفلام النفخ
The KMTL-65 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 2,000 mm for applications such as car film and food plastic wrap. The extruder uses a Ø 65mm x 2 screw with a 28:1 L/D ratio and a 50 HP AC driving motor with inverter. The die unit is fitted with a Ø500 mm die and Ø550 mm air ring. Film thickness ranges from 0.03 to 0.15 mm, output reaches 60-250 kgs/hr, and the take-up unit runs at speeds up to 40 m/min. Model: KMTL-65 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.03-0.15 mm Film width range: 2000 mm Film output: 60-250 kgs/hr Screw diameter/type: Ø 65mm x 2, L/D ratio 28:1 Driving motor: AC 50 HP + Inverter Die diameter: Ø500 mm / Air ring diameter: Ø550 mm Take-up speed: 40 m/min
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-55
الاقسام : آلات بثق أفلام النفخ
The KMTL-55 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 1,400 mm for applications such as car film and food plastic wrap. The extruder is built around a Ø 55mm x 2 screw with a 28:1 L/D ratio and a 30 HP AC driving motor with inverter. The die unit uses a Ø350 mm die and Ø400 mm air ring. Film thickness ranges from 0.025 to 0.15 mm, output reaches 20-150 kgs/hr, and the take-up unit runs at speeds up to 45 m/min. Model: KMTL-55 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.025-0.15 mm Film width range: 1400 mm Film output: 20-150 kgs/hr Screw diameter/type: Ø 55mm x 2, L/D ratio 28:1 Driving motor: AC 30 HP + Inverter Die diameter: Ø350 mm / Air ring diameter: Ø400 mm Machine dimension: 500x500x800 cm
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-40/45
الاقسام : آلات بثق أفلام النفخ
The KMTL-40/45 is a two-layer high-speed plastic inflation machine for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing 2-layer PE film up to 800 mm (KMTL-40) or 900 mm (KMTL-45) wide for applications such as car film and food plastic wrap. The KMTL-40 runs twin Ø40mm screws with a 20 HP AC driving motor and 6-zone auto thermo control, producing film at 15-70 kgs/hr; the KMTL-45 runs twin Ø45mm screws with the same 20 HP AC driving motor and 2-zone auto thermo control, producing film at 20-90 kgs/hr. Both models operate at a 26:1 L/D ratio and a take-up speed of 70 m/min. Models: KMTL-40 / KMTL-45 Suitable material: HDPE/LDPE/LLDPE (both) Film thickness: 0.010-0.15 mm (both) Film width range: KMTL-40 800 mm; KMTL-45 900 mm Film output: KMTL-40 15-70 kgs/hr; KMTL-45 20-90 kgs/hr Screw diameter/type: KMTL-40 Ø40mm x2; KMTL-45 Ø45mm x2 (L/D ratio 26:1 both) Driving motor: AC 20 HP + Inverter (both) Take-up speed: 70 m/min (both) Machine dimension: KMTL-40 450×200×400 cm; KMTL-45 470×220×450 cm
Co-rotating Twin Screw Underwater Pelletizing Compounding Line | CK-HT
الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات
CK-HT series Co-rotating Twin Screw Underwater Pelletizing Compounding Extrusion Line is designed especially for compounding materials with high viscosity, low MI, or difficulty to be shaped. The extrusion line can be applied to a wide range of materials and applications. Possible materials: TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
