روبوتات شعاع مدفوعة المؤازرة - سلسلة Bomarc الاقتصادية

تصنيف: حقن روبوت

ALFA AUTO. MACHINERY CO., LTD.

بلد: الصين

هاتف: 86-769-83180326 (237)

فاكس: 86-769-83180329

الشخص الذي يمكن الاتصال به: Kathy Zeng

الاستفسار الآن

Bomarc Economical series - Traverse Beam Robots for injection molding machine

BE□□□□ID/IS/WD/WSY
Model: 650/850/950
W : Telescopic stage
I : single stage
D: Product arm+runner arm

S : Single arm

Y: Traverse beam driven by AC servo motor

Main Specifications

Bomarc Economical series is applicable to all types of horizontal injection molding machines of 50-350T for product and runner take out .Ithas two types of arms , namely single stage and telescopic stage arm . R unner arm can be added when it’s three platen mold to take out product and runner at the same time .UsingBEseries robot can increase the productivity, reduce the defect rate , ensure safety of operators and accurately control the output to reduce waste .Dry cycle time is less than 8sec , using precision gearbox , the repetition precision for traverse axis is ± 0 . 1 mm .

Model	BE650 IDY/WDY	BE850 IDY/WDY	BE950 WDY
Power supply capacity (KVA)	1	1	1
Applicable molding machine (ton)	50-160	160-300	250-350
Traverse stroke(mm)	1300(1500)	1300 (1500)	1500 (1800)
Crosswise stroke (mm)	P: 200 R: 100	P: 300 R: 100	P: 300 R: 100
Vertical stroke (mm)	650	850	950
Max loading (Kg)	3	3	3
Dry take out time (sec)	2.3	2.6	2.9
Dry cycle time (sec)	8	9	10
Air consumption (NI/cycle)	12	14	14
Net weight (Kg)	150-210	180-260	180-260

Bomarc Economical Series General Specifications

power supply	working pressure	Maximum allowable air pressure	Drive mode	Swivel
1ΦAC220V±20V 50/60HZ	5Kgf/cm ² 0.49Mpa	8Kgf/cm ² 0.8Mpa	Y: AC Servo Motor X, Z: Pneumatic Cylinder	90° Fixed Pneumatic

Spraying device: Used for situations that demolding is not smooth.Spraying number of moulds and spraying time can be set.

Photoelectric inspection on finished products: The sensor can be installed at conveyor. Place finished product on the conveyor to avoid hitting among products.

Middle plate inspection:The position of the middle plate should be checked after mould opened end position to avoid runner arm from hitting middle-platen.

Air pressure scissors: Air pressure scissors can be installed for runner cutting.