As a leader in the industry with high output co-extrusion die heads, we provide customized designs based on customer product needs, offering the precise production pressure required to achieve the ultimate in thickness uniformity. With stringent standards for surface treatment, we minimize the risk of retention and degradation to the greatest extent and eliminate unnecessary raw material waste. We adopt the most suitable design solutions to provide our customers with the best experience. Customized Design  Experience of experts with advanced technology                   The flow channels for the melt are constructed through the combination of the latest technological calculations and years of accumulated experience. The melt is maintained at just the right production pressure and temperature within the mold. With sufficient overlaps, the die head ensures that as the plastic melt exits the die gap, it achieves optimal uniformity in thickness and strength.   Progress with customer                     Never-ending development of new product As technology is developing real fast, we keep developing blown film technology for new materials, faster than the anybody in this field. We have developed equipment for masking film, product protect film, medical TPU film due to customer's demands. Our goal is to stay at the forefront of the industry with our customers. Now, Horng Tair Group continues to develop new products in the fields of medical film, electronics packaging, food packaging, and daily necessities, providing all the know-hows came from rich experience and advanced technologies to the customers. Cost reduction of blowing film Reduce raw material degradation risk & Save a time of changing raw material Through the minimum contact surface and smooth turning angle in the flow channel, self-cleaning effect is increased and the risk of stagnation is eliminated. Thereby, using Horng Tair Die can reduce the time to complete material change and maintain the lowest operating energy consumption. Because Horng Tair pursues excellent smoothness of die channel surface, a special surface pre-treatment department was established to maximize the effect of surface coating and make every step of polishing careful and perfect. This effort of Horng Tair makes Horng Tair Die avoid the pipe effects and reduce cleaning frequency.   High reliability    Excellent durability of the die head                                       The high quality of Horng Tair Die Heads come from persistence in the selecting materials and heat treatment processes, which are complex and time-consuming. This makes them less susceptible to deformation due to metal fatigue and helps maintaining good thickness tolerances. Due to the structure with additional strength, and the design for the minimal pressure loss, which is achievable through calculation, the damage of the die head surface would be minimized to the greatest extent, and the service life of the die can be extended. Follow & Contact                                                                 https://www.youtube.com/@hungthai-group https://www.linkedin.com/company/horng-tair-group/   

Jia Thai Industrial Co., Ltd. Company Profile

Founded in 1989, the GMA Machinery Enterprise Co., Ltd. (GMA), an R&D team composed of senior design engineers and technicians with decade’s strong experience in sheet and film extrusion equipment and auxiliary parts, has been devoted to providing custom products based on customer requirements. With 30 years of continuous efforts, it is the one of the best manufacturer in the world. Based on comprehensive processing equipment, GMA is able to exercise strict quality control throughout the whole in-house process from product design, manufacturing, assembling and inspection which, in turn, has earned customers’ continuous recognition and praise.

Yomura Technologies Inc. was founded in 1989. With over 30 years of experience, we have been selected as OEM by multiple world-class brands. Moreover, Yomura has the tooling expertise to fabricate complex, high-end molds and the production capacity to manufacture large volumes of precision parts for just about any industry, such as 3C consumer goods, medical, automotive, aerospace products, military & industrial gear and more. 【Service Line】 Single Injection Mold Double Injection Mold Over Injection Mold Insert Injection Mold In Mold Decoration Liquid Injection Molding Metal Injection Micro Molding EMI Shielding Contract Assembly Optical Lens & LED Blow Molding Contract Mold Manufacture Silicone & Rubber Products   【Engineering】 Design and Development Partner Rapid Prototyping Tooling Soft Tooling Process Optimization

GMA Machinery Enterprise Co., Ltd. has manufactured extrusion-die and has focused on the technology of extrusion & coating dies for many years. In 2019, GMA welcomed its 30th year anniversary with abundant experience in this industry.  GMA supports your business & creates wonderful life by the following values: - Excellent Product Performance - Quality Policy - Highly Precision Quality & Products 【Features】 -  Complete Production Management -  Precision Machine -  In-house Chrome-plating Facility 【Industry Involved】 - Industrial Construction Material - Photoelectric Energy Saving - Aviation & Automotive - 3C Digital - Medicine Hygiene - Food Table Wares

Forwell has been a pioneer of Quick Mold Change Systems for many years. With over 20 years of experience in developing these systems they can offer you the best for your molding operations. These fully customizable Quick Mold Change Systems drastically minimize setup times, maximize efficiency and increase safety. Forwell’s Quick Mold Change System can be designed to fit almost any injection molding machine and mold casting machine to allow for quicker mold change times, resulting in shorter machine down time and increased productivity. This system uses a special mold clamp that does not require a cut out on the mold, increasing its application versatility and allowing it to be used with a large number of different molds.

Forwell has been a pioneer of Quick Mold Change Systems for many years. With over 20 years of experience in developing these systems they can offer you the best for your molding operations. These fully customizable Quick Mold Change Systems drastically minimize setup times, maximize efficiency and increase safety. Forwell’s Quick Mold Change System can be designed to fit almost any injection molding machine and mold casting machine to allow for quicker mold change times, resulting in shorter machine down time and increased productivity. This system uses a special mold clamp that does not require a cut out on the mold, increasing its application versatility and allowing it to be used with a large number of different molds.

Quick Die Change - Quick Die Change System-qdcs-en-Forwell Features : • Decreased die change time • Designed for hydraulic and pneumatic presses • Increased efficiency • Reduced labor costs • Safer operations System Introduction : Forwell’s Quick Die Change System is an automatic die changing system that can be specifically designed for hydraulic and mechanical power presses and press production lines. This system automates the die changing process and provides increased speed, efficiency and productivity to a workshop. The Quick Die Change System not only reduces die change time, but also promotes diverse small batch production runs and streamlines production management. Quick Die Change Systems are becoming a standard for large manufacturers as they not only increase production efficiency, but also improve the overall working environment. The Automatic Die Change System can be built specifically for your machining requirements and will drastically reduce machine idle time during die changes, boosting your competitiveness. There are also a number of indirect benefits of installing a Quick Die Change System for your hydraulic and mechanical type press machines. Firstly, automated operations reduce labor expenses, but also reduce workshop accidents and the physical stresses on operators, making them more productive. Secondly, all dies can be changed without any modification allowing for the use of standardized die and press equipment, saving costs. Lastly, multiple presses can share a single Quick Die Change System, further economizing on costs and resulting in higher efficiency and productivity.

Quick Mold Change - Quick Mold Change System-forwell-qmcs-en-Forwell Features • Decreased mold change time • Fully customizable to fit a wide range of machines • Safer operations • Reduced labor costs • Easy changeover for small batch runs System Introduction : Forwell has been a pioneer of Quick Mold Change Systems for many years. With over 20 years of experience in developing these systems they can offer you the best for your molding operations. These fully customizable Quick Mold Change Systems drastically minimize setup times, maximize efficiency and increase safety. Forwell’s Quick Mold Change System can be designed to fit almost any injection molding machine and mold casting machine to allow for quicker mold change times, resulting in shorter machine down time and increased productivity. This system uses a special mold clamp that does not require a cut out on the mold, increasing its application versatility and allowing it to be used with a large number of different molds. Quick Mold Change Systems can rapidly transform your workshop, allowing for easy changeover for small batches, reduced labor costs and reduced stock holding. Coupling this system with a Mold Cart System will allow for fully automatic mold changing, further increasing the efficiency and productivity of your manufacturing operations.

Feedblock - Polyside Die-GMA Two or triple manifold inlet design, plus feed block for multi structures, the width of stripe is adjustable, the adjusting range can be customized, flow adjusting design and adjustable lip can be applied on different thickness product. Application: 1. Heat-sealing food package box 2. Medicine package 3. Recycle material can be used on side to avoid waste Feature: 1. The stripe width is adjustable 2. Plus feed block, for more and different multi structures

Mold Cart - Mold Cart System-Forwell Features -Fully automated die or mold changing - High precision die or mold placement - Increased safety and efficiency - Can serve multiple production lines at once - Multiple layout configurations System Introduction :  Forwell's Die / Mold Cart System provides automatic die or mold changes for a range of different machines, such as plastic injection molding machines, plastic extrusion machines and press machines. This Die / Mold Cart system offers very fast, efficient and safe die and mold changes, using an advanced cart on rails system. Conventional die or mold changes can often take over an hour, but with the Die / Mold Cart System, die or mold changes are automatically completed in just a fraction of the time. Using this system, all procedures from die transfer and changing, to positioning and clamping is carried out by this system, resulting in extremely accurate die or mold changes. As the Die / Mold Cart System offers very precise die or mold changes, many operational issues can be avoided such as locking screws breaking when hand tightened, and incorrect mold alignment resulting in damage to the mold or production equipment. The Die / Mold Cart System also massively increases safety and efficiency, by allowing for automatic operations and making it feasible to perform many small batch production runs. Another great feature of this system is that it can be configured to specific user needs, different production facilities and serve multiple production lines at once.