برم تايوان

بحث - screen changer

We have found 38 product types of screen changer and 7 related suppliers. Get the most detailed machinery information and contact the manufacturers directly.
Highlighted Suppliers
منتجات
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65

الاقسام : خطوط إعادة التدوير حسب التطبيق

The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling

​​​​​​​FIMIC - مرشح مصهور أوتوماتيكي
​​​​​​​FIMIC - مرشح مصهور أوتوماتيكي

الاقسام : خطوط إعادة التدوير حسب التطبيق

يتم كشط أي تلوث يجمعه المرشح من سطحه بواسطة نصلتين ، ثم يتم جمعه بواسطة حامل الشفرة. أخيرًا ، يتم إخراج أي شيء يتم حصاده تلقائيًا من خلال الصمام الأمامي. ميزة أخرى مهمة هي إمكانية تحديد نقطة ضبط الضغط (في وضع الضغط) مع ليس أكثر من بضع نقرات على شاشة اللمس ، بحيث بمجرد الوصول إلى هذا المستوى ، سيستمر حامل الشفرة (يعمل بسرعة قابلة للتعديل) في التجمع التلوث ، فتح الصمام الأمامي فقط في دورة كاملة. في حالة وجود مادة إدخال ملوثة بشكل خاص ، لا يمكن ضبط المرشح للعمل في الوضع المستمر: سيواصل حامل الشفرة الكشط ، مع الاعتماد على فتحات الصمام المؤقتة للتصريف حسب الحاجة.

RAS UP 800
RAS UP 800

الاقسام : خطوط إعادة التدوير حسب التطبيق

FIMIC’s latest innovations are aimed to address the current challenges in the plastics recycling industry. RAS 800 is the new addition to the automatic self-cleaning melt filters models produced by FIMIC, its increased filtration surface (4775cm2) allows recyclers to reach a higher hourly production capacity with the efficiency and simplicity characteristic of FIMIC’s filtration technology.

FIMIC - مرشح مصهور أوتوماتيكي
FIMIC - مرشح مصهور أوتوماتيكي

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

مرشح المصهور الذي جعل تقنية FIMIC مشهورة في مجال إعادة التدوير ، معزز بإمكانية العمل في التدفق الرجعي. يمكن لمرشحات صهر RAS + REF أن تعمل بطريقتين مختلفتين: في وضع الكشط أو في وضع التدفق الرجعي ، مما يوفر المزيد من الخيارات لأي شخص يرغب في معالجة المواد باستخدام مرشحات شبكية. لذلك تمثل REF خيارًا مثاليًا لمعالجة الشبكة مع نتائج نهائية استثنائية.

FIMIC - مرشح مصهور أوتوماتيكي عالي الإخراج
FIMIC - مرشح مصهور أوتوماتيكي عالي الإخراج

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

بشكل مختلف عن RAS ، يصل هذا النموذج إلى سطح ترشيح أكبر نظرًا لوجود شبكتي ترشيح يتم توجيه كل المصهور نحوهما ، جنبًا إلى جنب مع كاشطين وصمامات تفريغ مستقلة. تتخلص الشفرتان من التلوث الذي يجمعه المرشح ، بينما يقوم حامل الشفرة بإخراجها تلقائيًا من خلال الصمام. يمكن ضبط وضع الضغط من شاشة اللمس ، في حين أن سرعة دوران حامل الشفرة قابلة للتعديل ويفتح الصمام فقط في دورة كاملة. في حالة وجود درجة أعلى من التلوث ، يتوفر وضع مستمر للسماح لحامل الشفرة بالكشط باستمرار. في هذه الحالة ، سيخبر المؤقت الصمام بموعد التفريغ.

FIMIC - مرشح مصهور تلقائي للتلوث العالي
FIMIC - مرشح مصهور تلقائي للتلوث العالي

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

يتكون ERA من غرفتي ترشيح داخليين وصمامين تفريغ مستقلين ، مما يتيح إعداد فلترة مسبقة في الخطوة الأولى وأدق واحدة في الثانية ، وكل ذلك في نفس الجهاز! وهذا يعني باختصار إمكانية استخدام شاشات مثقبة رخيصة (400-2000 ميكرون) لحماية شاشات الليزر باهظة الثمن (100-300 ميكرون) القادمة بعد ذلك. لا يمكن إنكار خفض التكلفة الناتج ، سواء من الناحية المالية أو النشطة.

FIMIC - مغير شاشة الحزام المستمر
FIMIC - مغير شاشة الحزام المستمر

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

TEN هو مغير الشاشة الأوتوماتيكي من FIMIC القادر على منع حتى أصغر الجسيمات الملوثة بفضل شبكته ، التي تسمح مقاومتها بتكييف درجة الحرارة وفقًا للمتطلبات والمواد المراد معالجتها. الفتحة القابلة للتعديل على خرج الشبكة هي ضمان إضافي لجودة المنتج النهائي. مكشطة صغيرة قريبة من الشبكة تحصد معظم النفايات وتمنعها من الانكسار عند تغييرها. سطح الترشيح 1.465 سم 2 لديه ضغط تحميل منخفض ؛ ولذلك فإنه يستبعد أي خطر التدهور. من الممكن أيضًا ضبط سرعة تغيير الشبكة ، وتحديد الضغط المستهدف الذي سيتم تبديله تلقائيًا ، لتلائم كل سير العمل مع المادة المراد تصفيتها. علاوة على ذلك ، عندما يتم تغيير الشبكة ، يتم تعليقها بواسطة ضغط المادة نفسه ولا تحتاج إلى أي أنظمة مساعدة أخرى. الشبكة المناسبة متاحة في مستويات ترشيح مختلفة ، تبدأ من 80 ميكرون / 170 شبكة. يمكن أيضًا تكييف TEN مع مستويات الترشيح الدقيقة التي تزود شبكات مخصصة. الافتتاح السريع مضمون دائمًا. ليست هناك حاجة لأدوات أو مهارات مخصصة ، لأن FIMIC توفر مفك براغي هوائي وقت الشراء.

آلة إعادة تدوير البلاستيك نوع تبريد المياه (GSR-100)
آلة إعادة تدوير البلاستيك نوع تبريد المياه (GSR-100)

الاقسام : خطوط إعادة التدوير حسب التطبيق

آلة إعادة تدوير الأفلام البلاستيكية المبردة بالماء GSR-100

آلة إعادة تدوير التقطيع المتكاملة
آلة إعادة تدوير التقطيع المتكاملة

الاقسام : معدات التكسير والتقطيع والتحويل إلى حبيبات

آلة إعادة التدوير المتكاملة للتقطيع يمكن أن تتعامل مع المواد الثقيلة الكبيرة أو مواد الأغشية الرقيقة

آلة إعادة تدوير المياه البلاستيكية نوع تبريد المياه (GSR-85)
آلة إعادة تدوير المياه البلاستيكية نوع تبريد المياه (GSR-85)

الاقسام : خطوط إعادة التدوير حسب التطبيق

آلة إعادة تدوير الأغشية البلاستيكية نوع التبريد بالماء (GSR-85)

فيلم / أكياس النفايات البلاستيكية آلة إعادة تدوير كر-150
فيلم / أكياس النفايات البلاستيكية آلة إعادة تدوير كر-150

الاقسام : خطوط إعادة التدوير حسب التطبيق

وقد تم تجهيز كل آلة فيلم مهب مع عداد طول الإلكترونية ومتر الوقت المتراكم. بالإضافة إلى ذلك، جميع مهاوي الإخراج الرئيسية هي أرض دقيقة لاستقرار استثنائي وتشغيل هادئ.

شاشة مبدل بسغ
شاشة مبدل بسغ

الاقسام : الترشيح ومبدلات الشاشة

سلسلة مبدل الشاشة الهيدروليكي بسغ هي ملحق هام لسلسلة بسم التوأم برغي الطارد.

PE Stretch Casting Film Extrusion Machine
PE Stretch Casting Film Extrusion Machine

الاقسام : خطوط بثق الأفلام المصبوبة

T-Die Extruder machine can produce waterproof PE film for baby diaper, sanitary napkin, folders, table cloths, medical film, etc. Film thickness 0.03~1 mm Equipped with a fully automatic winder with cutting and changing rolls functions Hydraulic screen changer for short maintenance stop We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.

آلة نفخ الأفلام البلاستيكية القابلة للذوبان في الماء PVA - GF-AV35.45.4
آلة نفخ الأفلام البلاستيكية القابلة للذوبان في الماء PVA - GF-AV35.45.4

الاقسام : آلات بثق أفلام النفخ

مادة PVA القابلة للذوبان في الماء والقابلة للتحلل والقابلة للتحلل البيولوجي

آلة نفخ الأفلام PBAT / جيش التحرير الشعبى الصينى
آلة نفخ الأفلام PBAT / جيش التحرير الشعبى الصينى

الاقسام : آلات بثق أفلام النفخ

قاعدة PBAT / PLA قابلة للتحلل والتحلل البيولوجي مواد صديقة للبيئة

خط إنتاج الصباغة والتكوير عالي السرعة
خط إنتاج الصباغة والتكوير عالي السرعة

الاقسام : خطوط التحبيب والخلط المركب

مناسبة للماجستير مع تكوير الألياف ، HDPE ، LLDPE ، LDPE ، PP ، PMMA ، ABS ، PC ، نايلون ، إلخ. تصميم لولبي خاص لمركب تغيير المواد سهل التشغيل

AUXILIARY EQUIPMENT
AUXILIARY EQUIPMENT

الاقسام :

This range of auxiliary equipment supports plastic film extruders and extrusion lines, covering the take-up, winding, and screen-changing stages of the process.The line-up includes a roller-type bubble guide bracket, a waste collecting winder with a gear box direct-connected to the main motor, a horizontal type winder and semi-auto winders (unit 1 and unit 2), and a choice of manual, horizontal, or pneumatic screen changers, along with a rotating die option.Bubble guide bracket: roller typeWaste collecting winder: gear box direct connect to main motorWinder options: horizontal type winder, semi-auto winder unit (1) and unit (2)Screen changer options: manual screen changer, horizontal screen changer, pneumatic screen changerDie option: rotating die

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-120
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-120

الاقسام : خطوط إعادة التدوير حسب التطبيق

The KCR-120 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 200-300 kgs / hr.Waste is crushed by a 30 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 120 mm screw (L/D ratio 30:1) heated at 80.8 kw across 7 zones and driven by an AC 100 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-120Suitable material: HDPE/LDPE/LLDPEOutput: 200-300 kgs / hrCrusher: 30 HPScrew diameter: Ø 120 mm, L/D ratio 30:1Heating capacity: 80.8 kw, 7 zoneDriving motor: AC 100 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L

Spaghetti Type Recycling Machine(GSR Series)
Spaghetti Type Recycling Machine(GSR Series)

الاقسام : خطوط إعادة التدوير حسب التطبيق

The GSR Series is JANDI'S water cooling, spaghetti type recycling machine for polyethylene and polypropylene film scrap. Film is fed by a spiral feeder into the extruder, and the melt is extruded through a spaghetti type die head into strands; the strands are cooled in a stainless steel water tank, dried by a blower and cut into pellets by a pull and cutting unit with a rotary cutter and fixed blade. A screen changer driven by an AC motor with reducer filters the melt ahead of the die.The series covers a range of extruder sizes and motor ratings so that capacity can be matched to the scrap volume of a film or bag plant; the figures for each model are listed per model in JANDI'S GSR specification table. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen and an air blower with storage tank. Details are available with quotation.Type: water cooling, spaghetti type recycling machine, GSR SeriesMaterial: HD/LD/LLDPE and PP film scrapSpiral feeder into the extruderScreen changer driven by AC motor with reducerSpaghetti type die head, stainless steel water tank and blowerPull and cutting unit with rotary cutter and fixed bladeOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, hydraulic screen changer, second extruder, vibrating screenExtruder size and capacity per model, confirmed at quotation

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-85
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-85

الاقسام : خطوط إعادة التدوير حسب التطبيق

The KCR-85 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-120 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 85 mm screw (L/D ratio 30:1) heated at 45.6 kw across 5 zones and driven by an AC 40 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-85Suitable material: HDPE/LDPE/LLDPEOutput: 80-120 kgs / hrCrusher: 15 HPScrew diameter: Ø 85 mm, L/D ratio 30:1Heating capacity: 45.6 kw, 5 zoneDriving motor: AC 40 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L

Die Face Cutting Type Recycling Machine(GHR Series)
Die Face Cutting Type Recycling Machine(GHR Series)

الاقسام : خطوط إعادة التدوير حسب التطبيق

The GHR series is a die face cutting type plastic film recycling machine for HD, LD and LLDPE and P.P. film scrap, producing pellets that can go back into the extruder. Scrap is fed into a stainless steel densifying tank with rotary cutters, then extruded through a hydraulic screen changer and cut at the die face; the pellets are dried in a stainless steel centrifuge unit and collected in a stainless steel storage unit. The series covers extruder sizes of 65 mm, 85 mm, 100 mm and 120 mm.Motors with inverter are 50 HP, 75 HP, 100 HP and 125 HP across the four sizes, for maximum capacities of 120 KG/HR, 200 KG/HR, 300 KG/HR and 400 KG/HR. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, second extruder, film roll feeder and vibrating screen. JANDI'S notes that adding a crusher makes it easier to handle scrap of different sizes such as loose film and die-cut waste, gives a more even temperature in the densifying stage, and results in more stable feeding, more stable extrusion output and more uniform pellet sizes.Type: die face cutting type plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Models: GHR65E, GHR-85E, GHR-100E, GHR-120E; extruder 65 mm, 85 mm, 100 mm, 120 mmMotor with inverter: 50 HP, 75 HP, 100 HP, 125 HPMax. capacity: 120 KG/HR, 200 KG/HR, 300 KG/HR, 400 KG/HRDensifying tank with rotary cutters, hydraulic screen changer, centrifuge drying unit and storage unit in stainless steelOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, 2nd extruder, film roll feeder, vibrating screen

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-100
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-100

الاقسام : خطوط إعادة التدوير حسب التطبيق

The KCR-100 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-200 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 100 mm screw (L/D ratio 30:1) heated at 71.7 kw across 6 zones and driven by an AC 60 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-100Suitable material: HDPE/LDPE/LLDPEOutput: 80-200 kgs / hrCrusher: 15 HPScrew diameter: Ø 100 mm, L/D ratio 30:1Heating capacity: 71.7 kw, 6 zoneDriving motor: AC 60 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L

الخيارات: أطباق مزدوجة
الخيارات: أطباق مزدوجة

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

نظام مبدل شاشة بدون توقف للحفاظ على تشغيل الإنتاج أثناء استبدال لوحة الفلتر. مع صفيحتين عسل النحل لزيادة مساحة الرشح وزيادة الكفاءة.

نظام الترشيح: مكابس مزدوجة
نظام الترشيح: مكابس مزدوجة

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

نظام مبدل شاشة بدون توقف للحفاظ على تشغيل الإنتاج أثناء استبدال لوحة الفلتر. مع 4 ألواح قابلة للإزالة على شكل خلية نحل لزيادة مساحة الرشح وزيادة الكفاءة.

نظام الترشيح: شطف خلفي
نظام الترشيح: شطف خلفي

الاقسام : خطوط تحويل البلاستيك المعاد تدويره إلى حبيبات

نظام مبدل شاشة بدون توقف للحفاظ على تشغيل الإنتاج أثناء استبدال لوحة الفلتر. مع 4 ألواح قابلة للإزالة على شكل خلية نحل لزيادة مساحة الرشح وزيادة الكفاءة. تقليل تكلفة الاستهلاك وتكرار تغيير الفلتر لتوفير تكلفة العمالة. يمكن لتصميم الممر الخاص تصريف المواد بشكل فردي ، وتطهير الملوثات بواسطة المرشح. نظرًا للترشيح عبر ممر محدد ، يقوم نظام تغيير شاشة التدفق الخلفي هذا بتطهير وطرد المواد المتسخة في وقت واحد.

مغير الشاشة
مغير الشاشة

الاقسام : أجهزة الفصل والترشيح

لوحة الشرائح الهيدروليكية لوحة مبدل النيتروجين لوحة لوحة مبدل الشاشة المزدوجة لوحة مبدل الشاشة

Rigid Sheet Extrusion Line
Rigid Sheet Extrusion Line

الاقسام : خطوط بثق الصفائح والألواح

1. Extruder is driven by AC Inverter duty motor, with excellent efficiency and lowest power consumption. 2. Extruder hopper with low-level sensor work with auto-feeder will keep material in stable supply. 3. Hydraulic driven screen changer avoid any particle goes to melting pump & flat-die. 4. Melting pump with accurate rotation control, keeps the material flow stable. 5. Extruder & melting pump speed is working on pressure synchronized controlling system.

B2B Food Grade Cleaning System with Modular Design
B2B Food Grade Cleaning System with Modular Design

الاقسام : خطوط الغسيل والفرز

China Factory Price 500–6,000 kg/h Food-Safe Plastic Recycling Equipment   Our food grade pet bottle washing recycling line is designed for efficient,hygienic,and high-capacity processing of post-industrial and post-consumer plastic waste.With output capacities from 500 to 6,000 kg/h,the B2B food grade cleaning system can be configured for recycling PET,HDPE,PP,and other compatible thermoplastics used in food packaging and related applications.   Manufactured in China,the food grade pet bottle washing line offers a cost-effective solution for plastic processors,packaging manufacturers,recycling plants,and material recovery facilities seeking reliable performance,flexible production capacity,and competitive factory-direct pricing.   Product Overview   The complete plastic recycling line can be customized according to the material type,contamination level,required output quality,and final application.Typical processing stages include:   1. Plastic waste feeding  2. Pre-sorting and metal removal  3. Crushing or shredding  4. Washing and friction cleaning  5. Hot washing, when required  6. Rinsing and dewatering  7. Drying  8. Label and dust separation  9. Melt filtration and extrusion  10. Pelletizing and final packaging    The food grade pet bottle recycling line can be supplied as a complete turnkey line or as individual machines for integration with an existing recycling facility.   Key Features   Food-Safe Processing Design   - Hygienic material-contact components available in stainless steel - Smooth internal surfaces designed to reduce material retention - Easy-access inspection doors and cleaning points - Suitable for processing plastic waste intended for regulated food-packaging applications,subject to final product testing and applicable certifications - Optional food-grade processing configuration for improved cleanliness and contamination control   Wide Capacity Range   - Processing capacity from 500 to 6,000 kg/h - Modular design for different production requirements - Available with single-stage or multi-stage washing and extrusion systems - Capacity can be adjusted based on material type,moisture content,contamination,and desired output quality   Efficient Plastic Recycling   - Heavy-duty shredders and crushers for consistent particle sizing - High-speed friction washers for removing dirt,paper,adhesives,and residual contents - Optional hot washing for challenging post-consumer waste - Efficient centrifugal dewatering and thermal drying - Advanced melt filtration to remove fine contaminants before pelletizing - Stable extrusion performance for producing uniform recycled plastic pellets   Flexible Material Compatibility   The food grade B2B PET bottle washing line can be configured for a variety of plastic materials,including:   - PET bottles and containers - HDPE bottles and packaging - PP containers,crates,and caps - Food packaging scrap - Post-industrial plastic film and rigid plastic - Household plastic packaging - Production waste from injection molding and blow molding   The exact line configuration depends on the material composition and the required recycled pellet quality.   Main Equipment Components   Plastic Crusher or Shredder   The crushing system in food grade PET bottle cleaning system reduces plastic waste into uniform flakes for efficient washing and downstream processing.Replaceable wear parts and durable cutting blades support continuous industrial operation.   Washing System   The washing section may include:   - Pre-washing tanks - Friction washers - High-speed rinsing units - Hot washing tanks - Floating separation tanks - Screw conveyors and material transfer systems   This combination helps remove soil,food residue,labels,oil, adhesives,and other contaminants.   Dewatering and Drying System   Centrifugal dewatering equipment removes surface moisture from washed flakes.Thermal or hot-air drying systems can further reduce moisture before extrusion,helping improve pellet quality and processing stability.   Extruder and Melt Filtration   The extruder melts and homogenizes the cleaned plastic flakes.A continuous screen changer or automatic melt filter can be installed to remove remaining solid impurities and improve the consistency of the recycled material.   Pelletizing System   Depending on the product requirements,the food grade pet bottle recycling machine can use:   - Water-ring pelletizing - Strand pelletizing - Hot-cut pelletizing - Underwater pelletizing for selected applications   The final pellets are suitable for reuse in injection molding,extrusion,blow molding,sheet production,fiber production,and other plastic manufacturing processes.   Advantages of the Equipment   - Factory-direct China pricing - High processing capacity from 500 to 6,000 kg/h - Complete turnkey recycling line available - Reduced labor requirements through automated material transfer - Energy-efficient washing and drying configurations - Durable construction for continuous industrial operation - Customizable layout and component selection - Improved recycling efficiency and material recovery - Stable recycled pellet quality - Optional PLC control and touchscreen operation - Technical support,installation guidance,and operator training available   Control and Automation   The food grade pet bottle washing machine can be equipped with a centralized electrical control system featuring:   - PLC-based automatic operation - Touchscreen monitoring - Motor overload protection - Temperature and pressure control - Emergency stop functions - Automatic feeding and material transfer - Production status and fault indication - Optional remote troubleshooting support   Automation level can be selected according to production requirements and budget.   Typical Applications   This food safe B2B recycling machine is suitable for:   - Food packaging recycling - PET bottle recycling - HDPE container recycling - PP packaging recycling - Plastic film and rigid plastic recovery - Post-industrial scrap recycling - Packaging factory waste management - Recycled pellet production - Closed-loop plastic manufacturing - Commercial and municipal recycling facilities   Food-Contact Application Notice   Equipment used for food-related plastic recycling can be manufactured with hygienic design features and food-grade material-contact components.However,whether the recycled plastic is suitable for direct food contact depends on the input material,decontamination process,regulatory requirements,laboratory testing,and final product certification.Customers should confirm applicable requirements with the relevant regulatory authorities before using recycled pellets in food-contact applications.   Customized Solutions   Customers can provide raw material photos,videos,samples,or process details for a recommended food safe plastic recycling equipment configuration and factory-price quotation.   Each recycling project can be configured according to:   - Plastic type and form - Required production capacity - Contamination level - Required flake cleanliness - Final pellet specifications - Available factory space - Water and energy availability - Degree of automation - Local electrical standards - Budget and investment plan   Why Choose This Plastic Recycling Line?   The 500–6,000 kg/h food grade pet bottle cleaning system provides a practical and scalable solution for converting plastic waste into valuable,reusable raw materials. This B2B food grade cleaning system’s modular structure,high-capacity design,hygienic processing options,and customizable automation make above food safe plastic recycling equipment suitable for both new plastic recycling plants and existing facilities upgrading their production capacity.   B2B Food Grade Cleaning System with Modular Design Customization High-Output Automation:https://www.petrecyclingmachinery.com/B2B-Food-Grade-Cleaning-System-with-Modular-Design-Customization-High-Output-Automation-pd585605848.html   PET Bottle Washing Line Manufacturer - Haorui Machinery:https://www.petrecyclingmachinery.com/PET-Bottle-Washing-Line-pl43660357.html   Plastic Recycling Machines & Solutions - Haorui Machinery:https://www.petrecyclingmachinery.com/products.html   PET Bottle Recycling Machine & Plastic Crusher - Haorui Machinery:https://www.petrecyclingmachinery.com/

آلة نفخ الأفلام أحادية الطبقة عالية السرعة
آلة نفخ الأفلام أحادية الطبقة عالية السرعة

الاقسام : آلات بثق أفلام النفخ

إنتاج موثوقة. رأس قالب فريد وحلقة هوائية لتحقيق فقاعة مستقرة وفيلم وحقيبة بسماكة أفضل. يوفر حلاً جيدًا لحقيبة التي شيرت وحقيبة التسوق والزراعة وغيرها الكثير. ارتفاع البرج قابل للتعديل. سمات يتم استخدام المواد الخام: HDPE / LDPE / LLDPE / EVA. آلة عالية الكفاءة مع استهلاك منخفض للطاقة ولكن إنتاجية عالية. صندوق تروس من الدرجة العالية مع نظام تشحيم قوي ومبرد زيت. أداء خلط جيد من البرغي والأسطوانة. أجهزة اختيارية محمل تلقائي يموت طبقة واحدة وحلقات هوائية أ / أ يموت طبقتين وحلقات هوائية يموت الروتاري مغير الشاشة اليدوي IBC (تبريد الفقاعات الداخلي) OBC نظام التحكم في سمك الفيلم (مقياس) معالج الاكليل بكرة النقش اللفاف المزدوج تحميل خلية طابعة فلكسوغرافية مدمجة

ماكينة أفلام ثقيلة ثقيلة
ماكينة أفلام ثقيلة ثقيلة

الاقسام : آلات بثق أفلام النفخ

Film width 2000 ~ 4000mm, for general packing and agricultural Hutch. Heavy duty construction, take up tower. Automatic surface winder with uploading device. Swing type manual screen changer. LDPE / LLDPE Heavy Duty Big Size Blow Film Machine. Screen changer of swing manual type. Extruding die of single spiral channel gives even and smooth flow pressure, Air ring of dual orifice design ensures ultimate cooling. Heavy duty steel structure takes up tower. EPC (Edge Position Controller) Fully automatic big roll type single winder or back to back auto winder.

Blown Film Accessories
Blown Film Accessories

الاقسام : أجهزة الفصل والترشيح

The critical details that perfect your blown film line, ensuring absolute stability from melt filtration to bubble stretching. We offer a variety of high-precision screen changers and bubble stabilizing systems that operate seamlessly with our die heads. These accessories effectively enhance raw material purity, reduce thickness tolerances, and significantly minimize downtime during material changes, delivering ultimate production efficiency to your blown film equipment.

الأجهزة الاختيارية للفيلم البلاستيكي المنفوخ
الأجهزة الاختيارية للفيلم البلاستيكي المنفوخ

الاقسام : حلول تسليم المفتاح وتكامل المعدات المساعدة

سمات ستلبي مجموعة كاملة من المعدات متطلبات الماكينة الخاصة بك ، كما نوفر قطع غيار الماكينة التي يتم بيعها بشكل فردي (ترقية رأس القالب والحلقة الهوائية ، ترقية مغير الشاشة ، ترقية اللفاف ، إلخ).