Heavy Duty Granulators-GXC Series
الاقسام : معدات التكسير والتقطيع والتحويل إلى حبيبات
GXC Series Heavy Duty Granulators with power ratings of 55kw to 315kw are designed for high throughput processing. With a variety of rotor configurations available, these granulators have a wide range of applications including; hollow and voluminous materials (i.e. plastic drums, crates and chairs), flexible materials such as films, woven bags and rubber, tougher materials such as profiles, thick sheets, and other general plastics.
آلة ختم الأكياس السفلية الثقيلة ذات الضغط العالي + نظام طي الأكياس BFGFA
الاقسام : ماكينات تصنيع الأكياس البلاستيكية
نظام الطي الأوتوماتيكي - الطي الأول والثاني بتحكم مؤازر بشكل فردي (قطعة قطعة) ، الطية الثالثة بواسطة أسطوانة هوائية كل 1-15 قطعة كومة. طيات الرابع والخامس اختياري.
PE HDPE 01
الاقسام : حبيبات بلاستيكية معاد تدويرها
HDPE pellets, white (pearlescent), Taiwan origin. Send your requirement for a quotation.
اثنين اللون هدب عالية السرعة آلة نفخ كمتك-40/45
الاقسام : آلات بثق أفلام النفخ
وقد تم تجهيز كل آلة فيلم مهب مع عداد طول الإلكترونية ومتر الوقت المتراكم. بالإضافة إلى ذلك، جميع مهاوي الإخراج الرئيسية هي أرض دقيقة لاستقرار استثنائي وتشغيل هادئ.
HDPE Bottle/Container Washing System
الاقسام : خطوط الغسيل والفرز
The HDPE washing line is designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE bottle container, etc. Minimizing the recycling water flow rate and evaporation losses. The shredding system is with wear-resistant design to maximize the consistent running of the system and minimize operational costs. High-speed washing system with corresponding speed according to material type liberates contamination from plastic flakes. The underwater force-washing paddle of the washing tank maximize the washing efficiency. Mechanical and thermal drying systems minimize the moisture of the end product. Shredding, high-speed washing and drying is set at suitable intensity to avoid over friction and cause material loss (fines creation). System automation ensures that components actions are linked, the system capacity is maximized, and the system is protected against interfering material in the best way.
ماكينة نفخ بلاستيك عالية السرعة HDPE KMH-45/55
الاقسام : آلات بثق أفلام النفخ
عرض الفيلم: قطر المسمار 100-900 مم: Ø 45/55 مم مادة مناسبة: HDPE
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35
الاقسام : آلات بثق أفلام النفخ
The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-65
الاقسام : آلات بثق أفلام النفخ
The KMH-65 is a high-speed HDPE blown film extrusion line built for wide-format film production, used in applications such as plastic shopping bags. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film through a die and air ring, then flattened and wound. The KMH-65 produces HDPE film in 0.008-0.10 mm thickness and up to 1300 mm width, with output between 20-80 kgs/hr.The extruder runs a Ø 65 mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø100/150 mm die paired with a Ø150/200 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KMH-65Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 1300 mmFilm output: 20-80 kgs/hrScrew diameter: Ø 65 mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 600×400×600 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-MINI
الاقسام : آلات بثق أفلام النفخ
The KMH-MINI is a compact HDPE blown film extrusion line built for smaller-format inflation film production. Within PRM-Taiwan's plastic inflation machinery category, HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-MINI produces HDPE film in 0.008-0.10 mm thickness and up to 550 mm width, with output between 15-32 kgs/hr.The extruder uses a Ø 40mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø60/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-MINISuitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 550 mmFilm output: 15-32 kgs/hrScrew diameter: Ø 40mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 370×270×340 cm
آلة التضخم عالية السرعة HDPE (GF-H45)
الاقسام : آلات بثق أفلام النفخ
آلة نفخ عالية السرعة HDPE (GF-H45)