تصنيف: هوت عداء سيستمز
بلد: Taiwan
هاتف: 886-2-29997193
فاكس: 886-2-29993403
الشخص الذي يمكن الاتصال به: Anny
- For the valve pin bushing is integrated with the nozzle, the structure of manifold become very simple, and therefore this series is most suitable for the multi-cavity application.
- There is a pin in the nozzle and drive by pneumatic or hydraulic to open or close the nozzle. When the valve pin open / close can control the melt filling.
- Especially for the big gate design, the valve pin will seal the gate after packing process to prevent the stringing and get the unapparent gat mark.
- No stringing, no drooling, no residue in the gate. Very good gate mark.
- Because it can provide bigger gate size, therefore it is very suitable for big size injection molding. Also lower injection pressure and less stress during molding.
- A sequence controlled valve gate system could help produce a no weld line part.
- We provide AVMT, SVDT, NL-SVDP, SVG types.
Type | SVDT 18 | SVDT 38 | SVDT 48 | SVDT 58 | SVDP 38 | SVDP 48 | SVDP 58 |
Ø D1 | 0.8~1.5 | 1.5~2.5 | 3.0~5.0 | 5.0~7.0 | 1.5~2.5 | 3.0~5.0 | 5.0~7.0 |
Ø D2 | 8 | 15 | 20 | 25 | 12 | 14 | 20 |
Ø D3 | 5 | 8 | 12 | 14 | 8 | 12 | 14 |
Ø D4 | 16 | 30 | 40 | 45 | 30 | 40 | 45 |
Ø D5 | 32 | 42 | 55 | 60 | 42 | 55 | 60 |
L | 60~120 | 100~250 | 100~400 | 100~600 | 100~250 | 100~400 | 100~600 |