Ultrasonic Plastic Welder KWD2615-N

POWER

SYSTEM

ULTRASONIC

SYSTEM

• Automatic frequency self-checking at startup

• Full-Bridge IGBT modules are used in the generator to improve durability

•  Automatic frequency control, no need to adjust the horn’s resonance

• PWM (Pulse Width Modulation) amplitude control, linear adjustment from 50%~100%

• PWM (Pulse Width Modulation) startup vibration control to avoid horn shaking during high voltage startup and protect the horn

• Protection against ultrasonic frequency deviation, high voltage and over current

• Frequency compensation as horn’s working temperature increased

• Resonance frequency compensation during the welding cycle to improve welding ability

• 8 selective start-up settings for ultrasonic activation to match various requirements of horn's design  

•  LED displays the percentage of ultrasonic power loading

CONTROL

SYSTEM

•  LCD display timing parameter & welding counter

•  LCD display ultrasonic frequency and welding energy  (external control box)

• Machine’s panel can set delay /welding/holding time (0.01-9.99 sec) and counter zero

• Time mode can set delay /welding/holding time

• Trigger mode can set trigger pressure by variable resistor

•  Energy mode can set welding energy target or interval

•  Abnormal welding alarm

• Electronic pressure sensor detect the trigger pressure

• Synchronous dual start button & cylinder up / ultrasonic emergency stop button

• AIR SOURCE：6kg/cm²

• CYLINDER：Ø63mm /　● STROKE：75mm

• COLUMN： Ø 100 mm

• The downward speed of the horn is adjusted in two stages from fast to slow to improve  welding stability

• Using precision liner guides to lift horn and ensure welding stability

• Use the rotating scale knob to adjust the downward position of the horn, which does not hinder the disassembly of the horn

• 405×145×286mm (L×W×H)

• 8Kgs

• 677×408(+165) ×1040-1400mm (L×W×H)

• 91Kgs