نظام تغيير القالب السريع

تصنيف: نظام تغيير القالب السريع

SANDSUN PRECISION MACHINERY CO., LTD.

بلد: تايوان

هاتف: 886-4-8282758

فاكس: 886-4-8282768

الشخص الذي يمكن الاتصال به: Garnett Chang

الاستفسار الآن

It is an era for making high frequency mold change with multiple patterns and small quantity. In order to save time for the mold change and ensure the safety of the operation, it is just in time to apply Quick Mold Change System.

SAFETY FUNCTION OF SYSTEM

Each hydraulic circuit has the function of check and avoiding oil leaking.
This system can add pressure automatically when the pressure reduction.
Each hydraulic circuit has the function of inspection pressure and can be interlocked with the machine.
It adopts the intersecting direction to clamp the mold.
There are several functions to avoid operation error.

MODEL SELECTION

①	②	③	④
Pump model:PB08 / PC12(22)	No. of Pump	No. of Control Circuit	Non-leak Valve: V(STANDARD TYPE) / M (Big flow type)

The hydraulic pump is driven by air. Once the outlet hydraulic pressure reaches the setting pressure, it will stop pumping which won't waste any energy. The pressure would be added automatically is the outlet pressure is reducing. It consists of the function to keep the pressure continuously..

DISCHARGE FLOW CHARACTERISTICS

PB08

PC12

Pa: Preumatic Pressure

OUTLINE DIMENSIONS

MODEL

L1

L2

H

H1

H2

D1

D2

V

PB08-1P4V

588

563

367

150

80

235

-

10

PC12-1P4V

588

563

367

150

80

-

175

10

PC12-1P4V

588

563

417

200

80

-

225

17

PCC1222-2P4M

868

843

417

200

80

-

225

27

CIRCUIT CONTROL SYSTEM

Clamp Selection

Model Selection

①	②
Capacity of Clamp:2-25(tons)	Empty:Standard type S: Slide moveable type N: With sensor type/DC10~30V (NPN, 3-Wire) V: Heat-resistant type C: Pneumatic cylinder movable type VR: Heat-resistant with cover type B: Fixed type

MODEL CB

VERTICAL LOADING

Platen with T-slot
Optional for position checking sensor

MODEL CB-N

VERTICAL LOADING

Platen with T-slot and manual clamp with sensor.

MODEL CB-C

VERTICAL LOADING

MODEL CB-S

VERTICAL LOADING

For Platen without T-slots and the sizes of mold are variable.

Suggested dimension of T-slot | Additional T-slots plated

T: The thickness of additional T-slot platen (min.)

MODEL CB-B

VERTICAL LOADING

For Platen without T-slot and the sizes of mold is unified.
Suggest CB-S for movable platen.

MODEL CG

CG Clamp is charactered in mechanical locking system. The holder of clamp can be shrunk into the clamp when unclamping. It can avoid interference between the holder and mold template.
It is only applied on Mold Changer System.

Model Selection

①	②	③	④
The capacity of clamp (4~50 ton)	Thickness of template ( H±0.5mm )	The direction of piping and wiring connection: L: on the left side (as below drawing) R: on the right side U: on the upper side	Sensor voltage: 3: DC10~30V (NPN, 3-Wire) 4: DC10~30V (PNP, 3-Wire)

CG-4B~10B

CG-16B~50B

Check Valve Clamp

FEATURE

Better safety design clamp.
Clamp with Build-in check valve, it can keeps the pressure itself.
The clamp will not release, even if the hydraulic tube is damaged.
Separate clamp body design, easy for maintain and exchange.
Waterproof design for cylinder and piston.

Model Selection

①	②
Capacity of Clamp:2-25(tons)	Empty:Standard type N: With sensor type/DC10~30V (NPN, 3-Wire) C: Pneumatic cylinder movable type